Threadlocker

This is the place for discussing gun care, custom work, repairs and ask related technical questions.
Post Reply
User avatar
Basu
Veteran
Veteran
Posts: 1320
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Threadlocker

Post by Basu » Sun Apr 11, 2010 7:34 pm

dear all,
Locktite is the product known to many of us yet it is not always available in all places.Pidilite has a product which is more available known as FEVIFIT 33 Anaerobic adhesive.Cost is Rs 20/- for 5ml pack.Generally available in hardware shops. I have used this product and found effective in withstanding vibration of gun. Need to mention that it works only in absence of oxygen.Various reports suggest that the cure time is varied from 10 minutes to 24 hrs.
Other link http://www.tuffbondadhesives.com, http://www.tuffbondadhesives.net


Basu
Not all those wander , are lost...............

For Advertising mail webmaster
User avatar
brihacharan
Old Timer
Old Timer
Posts: 3112
Joined: Fri Jan 22, 2010 3:33 pm
Location: mumbai

Re: Threadlocker

Post by brihacharan » Mon Apr 12, 2010 11:08 am

Hi Basu,

> Hey, good useful information.
> Will be useful when fitting the adaptor /seal on to the piston in air rifles.
> Also while mounting the base mount for scopes.
> The info that this product 'Fevifit" by Pidilite works in the absence of oxygen is a bit confusing, as there is oxygen present in the air where gunsmiths work!!!
> I remember reading sometime ago that gunsmiths in the US used epoxy cement for these jobs - this probably meant 'araldite', I presume.
> By the way who makes 'Locktite' - is it an imported product?
Cheers
Brihacharan

User avatar
eljefe
Old Timer
Old Timer
Posts: 2378
Joined: Sun Jun 04, 2006 3:37 am

Re: Threadlocker

Post by eljefe » Mon Apr 12, 2010 11:56 am

Anerobic-will work in the absence of oxygen-usually used to describe an organic reaction.
Here , it MAY mean, doesnt need air/oxygen for the reaction ( adhesion)to take place.

Araldite IS a 2 part epoxy, there are many such epoxies available, contain everything from fibreglass to polysteryne to SS, titanium, aluminium...take your pick
Loctite was made/or atleast packed and sold in India.Purple is low strength, red is high strength. Read the info sheet carefully
''It dont mean a thing, if it aint got that zing!''

"...Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away..."

User avatar
brihacharan
Old Timer
Old Timer
Posts: 3112
Joined: Fri Jan 22, 2010 3:33 pm
Location: mumbai

Re: Threadlocker

Post by brihacharan » Mon Apr 12, 2010 1:47 pm

eljefe wrote:Anerobic-will work in the absence of oxygen-usually used to describe an organic reaction.
Here , it MAY mean, doesnt need air/oxygen for the reaction ( adhesion)to take place.

Araldite IS a 2 part epoxy, there are many such epoxies available, contain everything from fibreglass to polysteryne to SS, titanium, aluminium...take your pick
Loctite was made/or atleast packed and sold in India.Purple is low strength, red is high strength. Read the info sheet carefully
Hi Eljefe,

> Tks for the clarification - that was pretty quick!
> Will look for the 'Red' if available locally as I'm planning to fix an Apex Synthetic Seal / washer to my IHP35 22 cal by this week-end.
Cheers
Brihacharan

User avatar
Basu
Veteran
Veteran
Posts: 1320
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: Threadlocker

Post by Basu » Wed Jul 11, 2018 5:57 pm

I understand that Pidilite has discontinued making of Fevifit 33 , instead they have come up with Fevicol ANR 124/128.
This is a low power thread locker.
Fevicol ANR 243 is mediun power one.
It does the same job like Locktite.

Basu
You do not have the required permissions to view the files attached to this post.
Not all those wander , are lost...............

Post Reply