I fancy a shotgun case...
-
- We post a lot
- Posts: 5775
- Joined: Mon May 22, 2006 6:23 pm
I fancy a shotgun case...
...but being too skint to afford a Pelican, Americase or SKB, I have decided to make one out of MDF or plywood.
At first I thought I would make one where the gun sits within the foam cut outs but then decided on making a more traditional type of shotgun case.
So let's see what finally materialises.
Mack The Knife
At first I thought I would make one where the gun sits within the foam cut outs but then decided on making a more traditional type of shotgun case.
So let's see what finally materialises.
Mack The Knife
- Pran
- Eminent IFG'an
- Posts: 994
- Joined: Sat Nov 25, 2006 2:06 pm
- Location: Bengaluru, Karnataka
Re: I fancy a shotgun case...
Waiting to see this one finished.
Pran
Pran
"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it."
- Vikram
- We post a lot
- Posts: 5105
- Joined: Fri Jun 02, 2006 6:14 am
- Location: Tbilisi,Georgia
Re: I fancy a shotgun case...
Rusty,
Knowing your dexterity with your hands and attention to detail,we are sure that is going to be one good looking piece.
Best-
Vikram
Knowing your dexterity with your hands and attention to detail,we are sure that is going to be one good looking piece.
Best-
Vikram
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."
- jonahpach
- Shooting true
- Posts: 872
- Joined: Tue May 23, 2006 10:25 pm
- Location: Aizawl
- Contact:
Re: I fancy a shotgun case...
'E be good with them hands too then Huh??Knowing your dexterity with your hands and attention to detail,we are sure that is going to be one good looking piece.
Best-
Vikram
Speak softly and carry a big gun!
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: I fancy a shotgun case...
Ya Rusty,
I know your meticulous nature will produce a much more than decent case. Look forward to seeing the finished one.
Btw whats that SxS in the pic. Yours? really looked after it well looks superb.
I know your meticulous nature will produce a much more than decent case. Look forward to seeing the finished one.
Btw whats that SxS in the pic. Yours? really looked after it well looks superb.
-
- We post a lot
- Posts: 5775
- Joined: Mon May 22, 2006 6:23 pm
Vikram,
My dexterity extends to giving orders to my carpenter.
I am pretty sure I could make one...eventually but I rather just have one made and get it over with.
Mack The Knife
P.S.: Been meaning to make one for some time now but it was a certain e-mail, you, I and few other punters received last night that has finally made me get off my backside....partially.
My dexterity extends to giving orders to my carpenter.
I am pretty sure I could make one...eventually but I rather just have one made and get it over with.
Mack The Knife
P.S.: Been meaning to make one for some time now but it was a certain e-mail, you, I and few other punters received last night that has finally made me get off my backside....partially.
-
- We post a lot
- Posts: 5775
- Joined: Mon May 22, 2006 6:23 pm
Re: I fancy a shotgun case...
Especially when it comes to hitting the 'Ban the blighter' button. Would, sir, care to see a demonstration?'E be good with them hands too then Huh??
Yes, that's my do-nali. I certainly did not get it in that condition. It's a Brno Hard Hitter Deluxe - 12 gauge, sidelock, extractor with full and full chokes and 28.25" long barrels. If you can ferret out any information on this model I would be very grateful.Btw whats that SxS in the pic. Yours? really looked after it well looks superb.
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: I fancy a shotgun case...
Sure will remember when I'm browsing around.Mack The Knife Bana";p="29165 wrote:If you can ferret out any information on this model I would be very grateful.
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: I fancy a shotgun case...
...Planning to mail the folks at http://www.zbrojovkabrno.comcottage cheese";p="29167 wrote:Sure will remember when I'm browsing around.Mack The Knife Bana";p="29165 wrote:If you can ferret out any information on this model I would be very grateful.
Cant seem to see the English option active.... the response will probably be zbjvzxpaf ztverzbfzz...etc..
- jonahpach
- Shooting true
- Posts: 872
- Joined: Tue May 23, 2006 10:25 pm
- Location: Aizawl
- Contact:
Re: I fancy a shotgun case...
'ang on.. Maybe one 'o dese days some poor obnoxious bloke might pop up.. otherwise a certain 'handyman' on this forum comes to mind..Especially when it comes to hitting the 'Ban the blighter' button. Would, sir, care to see a demonstration?
Speak softly and carry a big gun!
- Pran
- Eminent IFG'an
- Posts: 994
- Joined: Sat Nov 25, 2006 2:06 pm
- Location: Bengaluru, Karnataka
Re: I fancy a shotgun case...
Use Babelfish to translate.cottage cheese";p="29171 wrote: Cant seem to see the English option active.... the response will probably be zbjvzxpaf ztverzbfzz...etc..
Pran
"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it."
-
- Veteran
- Posts: 1427
- Joined: Thu Dec 07, 2006 10:15 am
- Location: Shillong-Dimapur
Re: I fancy a shotgun case...
Yaar,...Czech to English nahi hai...Pran";p="29178 wrote:Use Babelfish to translate.cottage cheese";p="29171 wrote: Cant seem to see the English option active.... the response will probably be zbjvzxpaf ztverzbfzz...etc..
Pran
-
- One of Us (Nirvana)
- Posts: 428
- Joined: Thu Mar 15, 2007 10:26 am
- Location: Pune,INDIA
- Contact:
Re: I fancy a shotgun case...
i guess a long wait..if it wud be carved out of wood...and some green velvet... wud be my prediction...
please patent in advance.
best of luck rusty
cheers sanjiv
please patent in advance.
best of luck rusty
cheers sanjiv
-
- Shooting true
- Posts: 788
- Joined: Wed Dec 27, 2006 11:53 pm
- Location: DELHI
Re: I fancy a shotgun case...
Rusty,
Thats really neat work...........so much to learn from u.........but more than ur case I love the finish of the stock of your gun.
Remember I am an old admirer of ur gun,
AC
Thats really neat work...........so much to learn from u.........but more than ur case I love the finish of the stock of your gun.
Remember I am an old admirer of ur gun,
AC