Indians For Guns

Suyash wrote: screwdriver pierced my finger
at four spots ( better than last time)

I hope you did not use MSeal for your finger.

brihacharan wrote: One alternative is to cut the exact thickness from a LPG Gas Tube (Double walled) & sandpaper it to exact size & insert in the breech.....
This had worked well for me till I found a source to procure "O" rings...
Try it - it should work
IFGian Basu has done thuis successfully!!!!
Briha

Should we use a pipe that is connected to cylinder on not connected to gas cylinder?

Dear all
I'm trying to explain that I didn't get the hard M seal by my composition.... Its soft and is quite rubberised....150 shots successfully shot seal is working great!

bennedose wrote:

Suyash wrote: screwdriver pierced my finger
at four spots ( better than last time)

I hope you did not use MSeal for your finger.

Nice idea benne... But I think fevi quick will be better ( its transparent you see)
300 shots successful...velocity is constant 520 fps and I DON'T think I'll be replacing it soon.
Working great!
Suyash

What store should I approach for a O ring? Plumbing store? Electrical store? Hardware store?

I'm planning to use glue stick with a heat gun. In the past, I've used this combination to seal a number of things from wood work to inverter battery contacts(prevents corrosion).

https://www.indiansforguns.com/viewtopi ... 22&t=21356

Basu

Basu,

That looks awesome. I measured my breach seal with a scale and found the o rings i was looking for on aliexpress.

I placed an order for these as breech seal - outer diameter 14mm, inner diameter 9mm, thickness 2.5mm
http://www.aliexpress.com/item/14mm-x-2 ... 60187.html

I also placed an order for these. They are - outer diameter 28mm, inner diameter 21m, thickness 3.5mm
http://www.aliexpress.com/item/50-Pcs-2 ... 96911.html

28mm is the thickness of the power tube. I feel o rings as a piston seal will be far better than the popular synthetic designs from diana

I hope the O ring type seal serves the purpose.
If it fails , go for welding hose , it will never ever fail.

Basu

Hi Suyansh,

You never posted how the experiment of yours ended.

Regards
dh

Get O ring from the Hardware store and use it, it's the best. If you couldn't get the proper size then chose slightly bigger O ring, cut the ring using blade and adjust the size. Use rubber solution in the seal gap to hold the O ring.

I again say that nothing matches welding hose.
Try it.

Basu

i used o ring from automobile spare shop of hero honda brand costing just 2-3 rs. as breach seal for my huricaine it fits perfectly . after firing 600 pellets till it is perfect & their is no air leak. try this sir

Hi Sagar,

Which O ring of Hero honda can be used for AR.

Regards
dh

i dont no exact name but they comes in pack of 6 rings of different sizes you can buy single also they are exactly o ring or you can buy from precihole onloline store at only rs 17 per piece they are of very high quality . i think hero honda rings are used as oil seal.

Thanks Sagar, Presently I do have a stock of leather & synthetic seal however was curious regarding your new option.

Regards
dh