Air rifle vibration after spring replacement

This is the place for discussing gun care, custom work, repairs and ask related technical questions.
Post Reply
User avatar
Jassim313
Fresh on the boat
Fresh on the boat
Posts: 11
Joined: Wed May 02, 2018 8:43 pm

Air rifle vibration after spring replacement

Post by Jassim313 » Wed Feb 20, 2019 8:01 am

Yesterday I changed the piston seal and spring of my ihp 35 .22 air rifle .But the gun has become quite loud after the replacement also there is considerable vibration .I'm using a precihole synthetic seal and TAS spring ( only Cherokee and tas were available, so I opted for TAS which is shorter than the stock ihp spring). There is increase in power but the vibration has made the gun less accurate. Can something be done to minimize the vibration ? Thanks

For Advertising mail webmaster
User avatar
vsraja
Almost at nirvana
Almost at nirvana
Posts: 213
Joined: Thu Sep 03, 2015 3:28 pm
Contact:

Re: Air rifle vibration after spring replacement

Post by vsraja » Thu Feb 21, 2019 8:15 pm

Cut three coils of spring and check whether the Piston seal and breach seal is properly working
With regards,
vsraja

User avatar
Vishnu2017
On the way to nirvana
On the way to nirvana
Posts: 97
Joined: Thu May 11, 2017 9:55 am
Location: COIMBATORE
Contact:

Re: Air rifle vibration after spring replacement

Post by Vishnu2017 » Fri Nov 15, 2019 9:01 am

Don't worry , it is usually happens when replace with new little powered main springs, confirm proper lubrication with moly Grease , after few 100 shots you can feel stability, unless you can try what VSRaja sir recommended,
DECIDE, COMMIT, SUCCEED (y) :D

Post Reply