Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the place for discussing gun care, custom work, repairs and ask related technical questions.
3 posts • Page 1 of 1
- Fresh on the boat
- Posts: 11
- Joined: Wed May 02, 2018 8:43 pm
Yesterday I changed the piston seal and spring of my ihp 35 .22 air rifle .But the gun has become quite loud after the replacement also there is considerable vibration .I'm using a precihole synthetic seal and TAS spring ( only Cherokee and tas were available, so I opted for TAS which is shorter than the stock ihp spring). There is increase in power but the vibration has made the gun less accurate. Can something be done to minimize the vibration ? Thanks
- On the way to nirvana
- Posts: 97
- Joined: Thu May 11, 2017 9:55 am
- Location: COIMBATORE
Don't worry , it is usually happens when replace with new little powered main springs, confirm proper lubrication with moly Grease , after few 100 shots you can feel stability, unless you can try what VSRaja sir recommended,
DECIDE, COMMIT, SUCCEED