Indians For Guns

Hello friends I got feeding problem with my ashani posting pics of ashani and faulty Magazine . In Magazine on the left you can notice that follower is too high .I got problem with this magazine only . When we buy new gun we get two magazines one with good finish and nothing is written on its bottom and another with some rough finish and letter ( S ) is written on it which means Spare magazine . Unfortunately I got feeding problem with original magazine which I was not using till date .
So finally I corrected the angle of follower by Making it 90 degree and now it is working very well .

Also posting pic how to take it out . Push follower with something I used toothbrush ,then engage spring with thin screwdriver tilt it and follower comes out .This thing I am sharing bcose some people think that Magazine is welded at bottom so how to open it .

Sent from my LS-5015 using Tapatalk

Good post Birbar, thanks for sharing

Cheers!
Abhijeet

Can you please elaborate as to how you corrected the angle of follower by Making it 90 degree??

Sure my dear tomorrow mundaire it's birbrar .

Sent from my LS-5015 using Tapatalk

birbrar wrote:Sure my dear tomorrow mundaire it's birbrar I M dentist by profession .

Sent from my LS-5015 using Tapatalk

My bad! Apologies for the typo Birbrar, no offence intended.

Cheers!
Abhijeet

Cheers bro

Sent from my LS-5015 using Tapatalk

Take out the follower out from Magazine as u can c follower on left is not having 90 degree angle so u can tie it in clasp and press the tip so that u can achieve 90 degree angle . Then put it back in Magazine and push it so that it goes to it's original position and take out screwdriver and slowly take out tooth brush .

U should also check feeding lips of magazines Soon will be posting on feeding lips. And use only ACP cartages
Kartoos [emoji6]. If U try hollow head they will also jam U have to reshape and reangle the barrel opening for that I have done it . Also do it at ur own risk as warranty void if pistol opened urself or at dealer or gunsmith [emoji41]