Indians For Guns

Thanks Dear Prashantji. I have replaced the 40 coil original IHP ( may be more than 22 years old) with a 35 model gsmith spring which was re-enforced with 3 no. of vortek's thick spacers to increase the wt. of the piston as well to increase the preload. I also removed the original thick washer of the piston seal to increse the length of the stroke. The result was excellent and the rifle was as good as new.

Added in 2 minutes 20 seconds:
Sorry. Lot many of spelling mistakes. The very small size of font is causing problems.
Regards

Added in 7 minutes 48 seconds:
Thanks Dear Prashantji. I have replaced the 40 coil original IHP ( may be more than 22 years old) with a 35 model gsmith spring which was re-inforced with 3 no. of vortek's thick spacers to increase the wt. of the piston as well to enhance the preload. I also removed the original thick washer of the piston seal to increase the length of the stroke. The result was excellent and the rifle was as good as new. Yes, for chrono test I used RWS hobby 11.9 grain which gave around 11.8 fpe and Gsmith highforce about 11FPE.

Hi savio
Thanks for the info. Will it work Stainless steel?

Why bother about blueing, when you can Cerakote it.
Cerakote, the worlds toughest thin film coating now has a certified applicator in India.

verify us at www.cerakoteguncoatings.com (got to : 'find applicator' and enter: 'India' as location)
or visit us at our website https://vocationalskillacademy.in/cerakote.php

vanlalthakima wrote:Why bother about blueing, when you can Cerakote it.
Cerakote, the worlds toughest thin film coating now has a certified applicator in India.

verify us at http://www.cerakoteguncoatings.com (got to : 'find applicator' and enter: 'India' as location)
or visit us at our website https://vocationalskillacademy.in/cerakote.php

whats the time take..also do you cerakote on site..obviously a firearm cant be shipped to you in this corrupt country...the risks are incredible

IFG member Bobby N.G.H does cerakote for firearms .

Hows old blueing to be removed...someone suggested white vinegar some brake cleaner??.please advice

Very simple. Cut one inch wide strips of 600 and 1000 grit sandpaper and rub against the surface in half circular direction (to and fro direction). The metal will soon shine.
Regards

narach93 wrote:Very simple. Cut one inch wide strips of 600 and 1000 grit sandpaper and rub against the surface in half circular direction (to and fro direction). The metal will soon shine.
Regards

see your message box

Great work, looks awesome

Just reblued a friends 55 year old SBBl.. A Sikander from Imam Ud Din and sons Sialkot... and my 125 year old Colt using the Birchwood Casey Liquid gun blue kit available on amazon. I am not a professional but was pretty happy with the results

Cold bluing is not long lasting as hot bluing. Cold bluing is mainly for touch up work.

tarzanboy73 wrote: ↑

Wed Sep 09, 2020 9:44 am

Just reblued a friends 55 year old SBBl.. A Sikander from Imam Ud Din and sons Sialkot... and my 125 year old Colt using the Birchwood Casey Liquid gun blue kit available on amazon. I am not a professional but was pretty happy with the results

Please see your PM

finished my brno reblueing with birchwoodcasey perma blue...took me 8 runs to establish some sort of ok blueing...the finish also depends upon the mettalurgical state of your weapon