• Advertisement
Kiehberg.in -  Outdoor gear and sports equipment

Gun Blueing Kit India

This is the place for discussing gun care, custom work, repairs and ask related technical questions.
narach93
Posts: 67
Joined: Thu Apr 06, 2017 3:07 pm

Re: Gun Blueing Kit India

Postby narach93 » Sat Feb 10, 2018 12:15 am

Thanks Dear Prashantji. I have replaced the 40 coil original IHP ( may be more than 22 years old) with a 35 model gsmith spring which was re-enforced with 3 no. of vortek's thick spacers to increase the wt. of the piston as well to increase the preload. I also removed the original thick washer of the piston seal to increse the length of the stroke. The result was excellent and the rifle was as good as new.

Added in 2 minutes 20 seconds:
Sorry. Lot many of spelling mistakes. The very small size of font is causing problems.
Regards

Added in 7 minutes 48 seconds:
Thanks Dear Prashantji. I have replaced the 40 coil original IHP ( may be more than 22 years old) with a 35 model gsmith spring which was re-inforced with 3 no. of vortek's thick spacers to increase the wt. of the piston as well to enhance the preload. I also removed the original thick washer of the piston seal to increase the length of the stroke. The result was excellent and the rifle was as good as new. Yes, for chrono test I used RWS hobby 11.9 grain which gave around 11.8 fpe and Gsmith highforce about 11FPE.



Rover solomon
Posts: 17
Joined: Tue Jan 02, 2018 10:56 pm

Re: Gun Blueing Kit India

Postby Rover solomon » Sat Feb 17, 2018 7:17 am

Hi savio
Thanks for the info. Will it work Stainless steel?




Return to “Gun Care & Gunsmithing”

Who is online

Users browsing this forum: No registered users and 2 guests