required .177 barrel for pcp airgun.

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
User avatar
guru050
Learning the ropes
Learning the ropes
Posts: 39
Joined: Thu Dec 21, 2017 10:40 pm

required .177 barrel for pcp airgun.

Post by guru050 » Sun Jun 03, 2018 11:01 am

Dear friends,

I need .177 barrel for pcp air gun. Please refer me any good indian barrel manufacturing company.


Thank you.

For Advertising mail webmaster
User avatar
mayankbanerjee1
On the way to nirvana
On the way to nirvana
Posts: 79
Joined: Mon Jun 26, 2017 4:07 pm

Re: required .177 barrel for pcp airgun.

Post by mayankbanerjee1 » Fri Jun 08, 2018 11:24 am

Hi Guru,

You may contact PreciHole for a barrel but you have to get hold of a mechinist to make hole for transfer port, guide for the o rings and notches for setscrews.

Regards,

Mayank

User avatar
guru050
Learning the ropes
Learning the ropes
Posts: 39
Joined: Thu Dec 21, 2017 10:40 pm

Re: required .177 barrel for pcp airgun.

Post by guru050 » Fri Jun 08, 2018 2:06 pm

mayankbanerjee1 wrote:Hi Guru,

You may contact PreciHole for a barrel but you have to get hold of a mechinist to make hole for transfer port, guide for the o rings and notches for setscrews.

Regards,

Mayank
Dear mayankbanerjee1,

Thank you for your response. Sure i will contact Precihole regarding this and as you mentioned i have machinist to do this job.
If you know any other company who can provide good quality barrels then please refer me.

Thank You.

User avatar
mayankbanerjee1
On the way to nirvana
On the way to nirvana
Posts: 79
Joined: Mon Jun 26, 2017 4:07 pm

Re: required .177 barrel for pcp airgun.

Post by mayankbanerjee1 » Sat Jun 09, 2018 1:52 pm

Hi Guru,

Search WAR air rifle in google. They sell barels. You can contact CZ barels in internet too. These are two very reliable places with very good barrels. Else ask Someone in US to buy it for you from pyramydair and send it or bring with them.

Regards

Mayank

Post Reply