Bent barrel on ihp. 22

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
krishan.adhikari1
Learning the ropes
Learning the ropes
Posts: 17
Joined: Fri Apr 10, 2015 5:27 pm

Bent barrel on ihp. 22

Post by krishan.adhikari1 » Sat Oct 28, 2017 1:25 am

Dear members,

I have an old ihp. 22.

It had a bent barrel once before and I got it repaired from garg Armoury in Delhi

They were kind enough to fix it for me.

They first day of shooting I shot around 100 pellets. It so happened that I corked my rifle and it shot itself. Alas as a result the barrel was bent again

Please suggest if I should get it repaired or I should donate it for parts to other users.

Thanks and Regards
Krishan Adhikari

[img]https://uploads.tapatalk-cdn.com/201710 ... 3e5206.jpg[/img][img]https://uploads.tapatalk-cdn.com/201710 ... 7ebda9.jpg[/img]

Sent from my Redmi Note 3 using Tapatalk

For Advertising mail webmaster
User avatar
vsraja
Almost at nirvana
Almost at nirvana
Posts: 220
Joined: Thu Sep 03, 2015 3:28 pm
Contact:

Re: Bent barrel on ihp. 22

Post by vsraja » Sat Oct 28, 2017 9:01 am

You should look on the auto fire problem first.Check the piston sear and the trigger sear.If trigger sear is the problem, change it.If piston sear is the problem, do the required work on it.After repair the bent barrel.Happy shooting.
With regards,
vsraja

krishan.adhikari1
Learning the ropes
Learning the ropes
Posts: 17
Joined: Fri Apr 10, 2015 5:27 pm

Re: Bent barrel on ihp. 22

Post by krishan.adhikari1 » Sat Oct 28, 2017 10:05 am

Any links to the solution as as I am a noob

Sent from my Redmi Note 3 using Tapatalk

Master
On the way to nirvana
On the way to nirvana
Posts: 70
Joined: Wed Sep 24, 2014 8:04 pm

Re: Bent barrel on ihp. 22

Post by Master » Sat Oct 28, 2017 6:48 pm

If the same barrel has been bent twice, structural integrity of the metal may be lost. It is similar to a metal wire which when twisted and turned several times may break. Should this barrel be used again ? With my limited experience, I would not do that.
Seasoned air gunners in the forum may guide you correctly.

krishan.adhikari1
Learning the ropes
Learning the ropes
Posts: 17
Joined: Fri Apr 10, 2015 5:27 pm

Re: Bent barrel on ihp. 22

Post by krishan.adhikari1 » Sat Oct 28, 2017 8:45 pm

Can i get a new barrel by any chance now that. 22 has been outlawed?

Sent from my Redmi Note 3 using Tapatalk

Master
On the way to nirvana
On the way to nirvana
Posts: 70
Joined: Wed Sep 24, 2014 8:04 pm

Re: Bent barrel on ihp. 22

Post by Master » Sun Oct 29, 2017 1:46 pm

You may get the barrel repaired and may use it as long as it lasts. Accuracy may not be same as before. Anybody repairing the barrel will be doing it externally.
Getting only barrel is difficult and you may get only if somebody is willing to dispose off his old rifle. You may post your requirement in 'Want to Buy' .

User avatar
snIPer
Veteran
Veteran
Posts: 1661
Joined: Wed May 23, 2007 12:06 pm

Re: Bent barrel on ihp. 22

Post by snIPer » Sun Oct 29, 2017 2:20 pm

You can straighten it yourself.
there are a few articles you can find on the net on this.

https://www.pyramydair.com/blog/2008/07 ... g-barrels/

/S
On my Epitaph - Off to Happy Hunting Grounds.

krishan.adhikari1
Learning the ropes
Learning the ropes
Posts: 17
Joined: Fri Apr 10, 2015 5:27 pm

Re: Bent barrel on ihp. 22

Post by krishan.adhikari1 » Sun Oct 29, 2017 3:01 pm

Hi Sniper,

I had also searched the nerve but all of them seem to ask for tools and ask to dismantle the air gun. Since I am a novice and I don't have tools, the prospect doesn't seen promising.

BTW does anyone know of gun smith's that's I can contact in Delhi as the ones of gun shops don't have the time to repair air rifles.

Tried to post in wanted but I couldn't post as I might have not met the minimum post requirement.

Sent from my Redmi Note 3 using Tapatalk

User avatar
snIPer
Veteran
Veteran
Posts: 1661
Joined: Wed May 23, 2007 12:06 pm

Re: Bent barrel on ihp. 22

Post by snIPer » Mon Oct 30, 2017 10:26 am

Here is what i do.
First remove the barrel - Only a screwdriver is required for that.
Find out where exactly the bend is - place the barrel between 2 rods - a window or grill etc - and push in the opposite side gently- that is all it takes -
Continue until it seems straight.
make sure you have some cloth or packing around it to prevent any scratches.
Let me know if you have any questions.
/S
On my Epitaph - Off to Happy Hunting Grounds.

krishan.adhikari1
Learning the ropes
Learning the ropes
Posts: 17
Joined: Fri Apr 10, 2015 5:27 pm

Re: Bent barrel on ihp. 22

Post by krishan.adhikari1 » Tue Oct 31, 2017 12:20 am

snIPer wrote:Here is what i do.
First remove the barrel - Only a screwdriver is required for that.
Find out where exactly the bend is - place the barrel between 2 rods - a window or grill etc - and push in the opposite side gently- that is all it takes -
Continue until it seems straight.
make sure you have some cloth or packing around it to prevent any scratches.
Let me know if you have any questions.
/S
Thanks sniper will try it tomorrow

Sent from my Redmi Note 3 using Tapatalk

Post Reply