Review: Precihole PX100 Achilles

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
User avatar
mayankbanerjee1
On the way to nirvana
On the way to nirvana
Posts: 79
Joined: Mon Jun 26, 2017 4:07 pm

Re: Review: Precihole PX100 Achilles

Post by mayankbanerjee1 » Sat Jan 13, 2018 10:56 pm

dlancerx wrote:Can tuning the hammer spring (like giving it more tension using an o-ring) of the px100 increase the velocity?
Dear dlancerx,

A stiffer spring can help you increase the velocity but will lead to lower shot count per fill. Your modification to the velocity may have considerable effect on the accuracy of your gun. I believe that you know about the fact that there is a legal limit to the energy delivered by projectile at the muzzle. it is the responsibility of the airgun owner not to breach it and may lead to fatality. " Happy Shooting".

Regards,

Mayank

For Advertising mail webmaster
Saranjana
Fresh on the boat
Fresh on the boat
Posts: 1
Joined: Sat Jan 27, 2018 7:54 pm

Re: Review: Precihole PX100 Achilles

Post by Saranjana » Sat Jan 27, 2018 8:15 pm

Hi All,
I am Saravanan from Chennai

Can any one help to know about precihole px100 achllies.I am new to air rifle and I don't have any.
After reviewing some blogs I have come to know that precihole px100 is best among all.
But my only concern is
1. What are all the add-on items we will get with Rifle
2. Buying scuba tank is not my choise. So filling air will be the toughest part as we don't have any feasibility in Chennai to fill air. How can I solve this issue
3 . We have only two dealers in Chennai for to support precihole that too not good. If this is the case will precihole do after sales service in Chennai
4.what is the warranty or guarantee period ?
5.Do we have any place in Chennai to fill air ?
Rgs
Saravanan

User avatar
mayankbanerjee1
On the way to nirvana
On the way to nirvana
Posts: 79
Joined: Mon Jun 26, 2017 4:07 pm

Re: Review: Precihole PX100 Achilles

Post by mayankbanerjee1 » Sun Jan 28, 2018 1:28 am

Saranjana wrote:Hi All,
I am Saravanan from Chennai

Can any one help to know about precihole px100 achllies.I am new to air rifle and I don't have any.
After reviewing some blogs I have come to know that precihole px100 is best among all.
But my only concern is
1. What are all the add-on items we will get with Rifle
2. Buying scuba tank is not my choise. So filling air will be the toughest part as we don't have any feasibility in Chennai to fill air. How can I solve this issue
3 . We have only two dealers in Chennai for to support precihole that too not good. If this is the case will precihole do after sales service in Chennai
4.what is the warranty or guarantee period ?
5.Do we have any place in Chennai to fill air ?
Rgs
Saravanan

Dear Saravanan,

There are few threads on PX100 in this forum, if you search it, u will acquire a wealth of knowledge.

1. Best person to answer all your queries to PX100 is Precihole support. go to their website, send a mail or call. they are very very supportive.

2. buy a PCP hand pump.it may cost from Rs 3500 (chinese) to Rs 28,000(UK, hill pump). i would suggest to start with Low cost PCP pump.

3. Trust issue is a big thing with the dealers. I believe it is a simple gun. if you have interest in mechanical tinkering, you may master it by your self.

4. Hopefully 1 year, but ask Precihole....

5. Yoiu may check with the local fire station or the local rifle club. usually these are the two places you may get a high pressure pump. you may talk with SCUBA diving/ Navy guys at chennai for the same.

I hope the information will be useful to your quest.

Regards,

Mayank

Jomy john
Fresh on the boat
Fresh on the boat
Posts: 2
Joined: Sat Apr 07, 2018 1:09 am

Re: Review: Precihole PX100 Achilles

Post by Jomy john » Sat Apr 07, 2018 1:49 pm

Which pellet is more suitable for ph px 100

User avatar
GNV
Shooting true
Shooting true
Posts: 606
Joined: Tue Nov 06, 2012 4:30 am
Location: Tadepalligudem, Andhra Pradesh.

Re: Review: Precihole PX100 Achilles

Post by GNV » Tue Apr 10, 2018 8:38 am

sorry wrong weight. Best pellet for PX-100 Achilles is JSB 10.34 grain.

User avatar
GNV
Shooting true
Shooting true
Posts: 606
Joined: Tue Nov 06, 2012 4:30 am
Location: Tadepalligudem, Andhra Pradesh.

Re: Review: Precihole PX100 Achilles

Post by GNV » Tue Apr 24, 2018 8:58 pm

My Achilles with a 9" Suppressor. Now the only sound audible at the shooters point is the sound of the hammer hitting the valve .
Achilles.JPG
Added in 3 minutes 30 seconds:
Achilles.JPG
Added in 6 minutes 2 seconds:
The same suppressor works great on FX Impact too.
impact.jpg
You do not have the required permissions to view the files attached to this post.

prashantjha19
Almost at nirvana
Almost at nirvana
Posts: 110
Joined: Sun Sep 03, 2017 4:53 pm

Re: Review: Precihole PX100 Achilles

Post by prashantjha19 » Tue Apr 24, 2018 10:25 pm

That is indeed a very useful heads-up for all enthusiasts keen on trying out modifications on their guns....and thank you indeed for this update, GNV sir!
I also think that, going forward, a basic round up from your side of all that one needs to be mindful of (e.g. thread sizes, adaptor, alteration in weight distribution, etc) to carry out this mod on their guns will be most apt. How much heavier did the moderator make the gun?
Second, did you also notice in change in group size or shift in POI after installation please? Just curious if the added weight affected barrel vibration and it's elliptical cycle in a way that may have altered the pellet exit from an antinode to node. I am asking because this is most usually the case.
One additional thing that I am also keen to know is if such a mod would be advisable on a springer. And if so, are there adapters sized for the most common barrel ODs of springers (normally ranging between 14.5 to 16mm, to the best I recall offhand). I understand though that barrel sizes on most local guns are already in excess so an add-on will only make them cumbersome and woefully long.; but a word of advice would be most useful.
Thanks again and look forward to hearing more.
Regards,
Prashant

User avatar
Bullo oka
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Mon Apr 23, 2018 11:24 am
Location: Hapoli

Re: Review: Precihole PX100 Achilles

Post by Bullo oka » Wed May 02, 2018 2:56 pm

For the springer it won't work, I built two of them(suppressor)
(1)Metal rod for barrel and spray can for chamber loaded with steel wool.
(2)Two pvc pipe with different diameter and loaded it with cotton wrap.
(Lots of hotglue & tape.)
It neutralize the sound output from barrel but the sound of piston hammering is still there and it makes no sense to use compressor with Spring/Nitro piston rifle.

Doesn't looks good, DIY with unused items.
ImageImageImageImageImageImage

Sent from my ONEPLUS A5000 using Tapatalk

prashantjha19
Almost at nirvana
Almost at nirvana
Posts: 110
Joined: Sun Sep 03, 2017 4:53 pm

Re: Review: Precihole PX100 Achilles

Post by prashantjha19 » Thu May 03, 2018 10:38 am

Pretty innovative that, dear Bullo Oka!!
Most commendable out-of-box effort!! Thanks for sharing!

To the best of my understanding of barrel size vis-a-vis stroke (and related power plant specs), such a makeover would be advisable only for low powered plinkers with short barrels. A half-inch UNF thread, I learn, is all you need on the barrel to mount suppressors /moderators....or a muzzle brake attachment (one with concentrically placed holes for quickly dissipating the muzzle air blast), in the least!!
Cheers!
Prashant

User avatar
Bullo oka
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Mon Apr 23, 2018 11:24 am
Location: Hapoli

Re: Review: Precihole PX100 Achilles

Post by Bullo oka » Fri May 11, 2018 2:35 am

Hi, everyone.
Don't you guys think that the bolt action lever in px100 is bit odd looking.

Sent from my ONEPLUS A5000 using Tapatalk
You own Gun
That doesn't mean you have to use it.
Maybe :stupid: Think Bright.

TOM CAT
Fresh on the boat
Fresh on the boat
Posts: 1
Joined: Fri May 11, 2018 2:37 pm

Re: Review: Precihole PX100 Achilles

Post by TOM CAT » Fri May 11, 2018 2:44 pm

hi ,

I am new in your sight , may i know how to import a thermal scope from us and my friend is staying there. Any customs problem while couriering the item through courier , pls guide

hz_ralsun
Fresh on the boat
Fresh on the boat
Posts: 3
Joined: Wed May 30, 2018 4:36 pm

Re: Review: Precihole PX100 Achilles

Post by hz_ralsun » Wed May 30, 2018 5:09 pm

My PX 100 with custom stock ang custom suppressor
IMG-20180502-WA0003.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Bullo oka
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Mon Apr 23, 2018 11:24 am
Location: Hapoli

Re: Review: Precihole PX100 Achilles

Post by Bullo oka » Wed May 30, 2018 8:17 pm

hz_ralsun wrote:My PX 100 with custom stock ang custom suppressor
IMG-20180502-WA0003.jpg
ImageImageImageImage Precihole needs to learn from you

Sent from my ONEPLUS A5000 using Tapatalk
Introduction Pls.
You own Gun
That doesn't mean you have to use it.
Maybe :stupid: Think Bright.

Imsujamir
Fresh on the boat
Fresh on the boat
Posts: 7
Joined: Fri Jun 30, 2017 5:30 pm

Re: Review: Precihole PX100 Achilles

Post by Imsujamir » Thu May 31, 2018 10:04 pm

hz_ralsun wrote:My PX 100 with custom stock ang custom suppressor
IMG-20180502-WA0003.jpg
How did u do with the trigger mechanism??

Imsujamir
Fresh on the boat
Fresh on the boat
Posts: 7
Joined: Fri Jun 30, 2017 5:30 pm

Re: Review: Precihole PX100 Achilles

Post by Imsujamir » Fri Jun 01, 2018 6:47 pm

hz_ralsun wrote:My PX 100 with custom stock ang custom suppressor
IMG-20180502-WA0003.jpg
From where did u mod. The gun

Post Reply