Making cost effective spring compressor for Air gun

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
Post Reply
User avatar
Oreku
Learning the ropes
Learning the ropes
Posts: 17
Joined: Mon Mar 06, 2017 12:18 am

Making cost effective spring compressor for Air gun

Post by Oreku » Mon Apr 03, 2017 10:06 pm

Hi Friends,

Have made this, perfectly fine working spring compressor for Air rifle. I have a Precihole SX100 Springer, so the length of device has been adopted for same as the length of piston tube. It took me one day and few bucks to build this "Jugaad". The costliest component is the heavy duty "C" Clamp I brought form tool market.

Its always better to have such one at your home rather than to rush for gun smith every time you want to do some tuning/ lubrication and replacement of parts in your gun.

I wish to change my Precihole SX from Spring power to Nitro piston. Very soon will upload the pics of complete disassembly of my SX100.
You do not have the required permissions to view the files attached to this post.
Last edited by Oreku on Wed Apr 05, 2017 12:28 am, edited 1 time in total.

For Advertising mail webmaster
User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: Making cost effective spring compressor for Air gun

Post by Basu » Tue Apr 04, 2017 8:15 am

Very nice......

Basu
Not all those wander , are lost...............

User avatar
Oreku
Learning the ropes
Learning the ropes
Posts: 17
Joined: Mon Mar 06, 2017 12:18 am

Re: Making cost effective spring compressor for Air gun

Post by Oreku » Wed Apr 05, 2017 11:31 am

Many thanks Dada!!

nitroex700
Almost at nirvana
Almost at nirvana
Posts: 226
Joined: Tue Jul 19, 2016 3:49 pm

Re: Making cost effective spring compressor for Air gun

Post by nitroex700 » Wed Apr 05, 2017 5:41 pm

Let me know how the end wooden block holds up on the plywood once done...

I tried a jugaad with a car jack once but didn't work so well...

User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: Making cost effective spring compressor for Air gun

Post by Basu » Wed Apr 05, 2017 7:09 pm

Nitroex700,
I used the car jack effectively with two bricks held between wooden door frame. :mrgreen:
I took the help of my driver as well.


Basu
Not all those wander , are lost...............

nitroex700
Almost at nirvana
Almost at nirvana
Posts: 226
Joined: Tue Jul 19, 2016 3:49 pm

Re: Making cost effective spring compressor for Air gun

Post by nitroex700 » Wed Apr 05, 2017 10:29 pm

Sir I tried the same jugaad.. but not only did it break the plaster but the tube also jumped out on applying pressure... Never tried it again after that! :D

User avatar
vsraja
Almost at nirvana
Almost at nirvana
Posts: 220
Joined: Thu Sep 03, 2015 3:28 pm
Contact:

Re: Making cost effective spring compressor for Air gun

Post by vsraja » Thu Apr 06, 2017 1:14 am

It looks like the length is equal to the length of the receiver ,which is not sufficient, if the gun has some heavy preload.Also the 'u' clamp looks too small and the screws holding were very small.Keep in mind that sometimes the pressure of preload will be huge, hence you need a better screw size for the u-clamp for safe handling the job.Other things looks solid.
With regards,
vsraja

User avatar
Oreku
Learning the ropes
Learning the ropes
Posts: 17
Joined: Mon Mar 06, 2017 12:18 am

Re: Making cost effective spring compressor for Air gun

Post by Oreku » Fri Apr 07, 2017 10:51 am

nitroex700 wrote:Let me know how the end wooden block holds up on the plywood once done...

I tried a jugaad with a car jack once but didn't work so well...
Hi Nitroex,

The base of this device is Teak wood, not any plyboard. And the end wood is solid piece of Rose wood bolted at three points. Am having no probs using it and its working smooth.

User avatar
Oreku
Learning the ropes
Learning the ropes
Posts: 17
Joined: Mon Mar 06, 2017 12:18 am

Re: Making cost effective spring compressor for Air gun

Post by Oreku » Fri Apr 07, 2017 11:03 am

vsraja wrote:It looks like the length is equal to the length of the receiver ,which is not sufficient, if the gun has some heavy preload.Also the 'u' clamp looks too small and the screws holding were very small.Keep in mind that sometimes the pressure of preload will be huge, hence you need a better screw size for the u-clamp for safe handling the job.Other things looks solid.
Hi Vsraja,

As said I have a SX100 Pegasus, build this juggad keeping in view of my specific needs. The length is kept just to match the receivers length, same goes with 'U" clamps ...it perfectly holds the receiver well tight. The 'C" clamp I brought was the most heavy duty available in market which cost me extra bucks, getting a drill into that was also a tricky task as most of the iron work vendors didn't have the special Bits to drill into a cast iron, it took me lot of effort to find someone who can make drill into that. You can make your own specific to your length and needs.

Cheers!!

User avatar
Oreku
Learning the ropes
Learning the ropes
Posts: 17
Joined: Mon Mar 06, 2017 12:18 am

Re: Making cost effective spring compressor for Air gun

Post by Oreku » Fri Apr 07, 2017 3:28 pm

Hi guy's... As said, uploading the complete disassembly pics of SX100 Pegasus using the same spring compression "Jugaad" :)
You do not have the required permissions to view the files attached to this post.

User avatar
Oreku
Learning the ropes
Learning the ropes
Posts: 17
Joined: Mon Mar 06, 2017 12:18 am

Re: Making cost effective spring compressor for Air gun

Post by Oreku » Fri Apr 07, 2017 3:38 pm

Hi..adding some more pics as files got too large for previous post.
You do not have the required permissions to view the files attached to this post.

narach93
On the way to nirvana
On the way to nirvana
Posts: 95
Joined: Thu Apr 06, 2017 3:07 pm

Re: Making cost effective spring compressor for Air gun

Post by narach93 » Wed Jun 07, 2017 1:45 pm

Dear Oreku.
You should patent the spring compresser device. I also ordered a C -clamp to built a similar one. So do fact to protect your design.

Post Reply