Re: GenNex- Excellent Choice for New Shooters
Posted: Thu Jul 20, 2017 8:07 pm
Dear GNV
I think you are right about finish I do find sometimes, This burr here and there it's just a matter of 5 minutes of filing but again if someone misses it definitely they are taking us for granted.
Now moving to other aspects wooden stocks are very difficult to smoothen inside due to lack of proper machinery and sadly almost all wooden stocked airrifles has this problem even in Diana 350 also I saw very pieces but HW airrifles are best finished may be some other airrifle also I don't know of..
And this stocks are laser engraved which add personality to the gun u too will believe it right?
Breech seal is a bummer in your gun I must say this mine genexs breech seal is so perfect as it seems that it's an orings.Rest assured these neoprene seal are very very long lasting mark my words as I know this after several thousands shots if u notice any velocity drop put thin shim below it and it's new again.
One thing I came to know recently in one article that synthetic breech seal needs frequent lubing so u do so every 500shots with silicon grease u already have for ur pump just like rubbing balm on lips.
These sdbs guns are factory tuned with moly and they also sight in.Because all gun were spot on accurate out of the box.This anyone can feel when u cock load and fire the gun.No rattling sound ever and neither disealing or detonation whatsoever. You will feel this too soon.
As for pellet selection I use only and only jsb 8.4 grain these pellet and SDB barrel are made for each other ,you will know when you use it.
Avoid using 9plus pellet in this gun can break mainspring due to smaller powerplant of genex when itried heavy pellet it started struggling .
Rest it's a fun gun to shoot you too will tell this .
And yes adjust the trigger you know the way already.
These are my opinion and understanding about this genex .
One thing I can promise u though that it's the gun you are going to shoot more than any airrifle soon.
Enjoy the gun be healthy and safe.
Regards
Veerbhadra
I think you are right about finish I do find sometimes, This burr here and there it's just a matter of 5 minutes of filing but again if someone misses it definitely they are taking us for granted.
Now moving to other aspects wooden stocks are very difficult to smoothen inside due to lack of proper machinery and sadly almost all wooden stocked airrifles has this problem even in Diana 350 also I saw very pieces but HW airrifles are best finished may be some other airrifle also I don't know of..
And this stocks are laser engraved which add personality to the gun u too will believe it right?
Breech seal is a bummer in your gun I must say this mine genexs breech seal is so perfect as it seems that it's an orings.Rest assured these neoprene seal are very very long lasting mark my words as I know this after several thousands shots if u notice any velocity drop put thin shim below it and it's new again.
One thing I came to know recently in one article that synthetic breech seal needs frequent lubing so u do so every 500shots with silicon grease u already have for ur pump just like rubbing balm on lips.
These sdbs guns are factory tuned with moly and they also sight in.Because all gun were spot on accurate out of the box.This anyone can feel when u cock load and fire the gun.No rattling sound ever and neither disealing or detonation whatsoever. You will feel this too soon.
As for pellet selection I use only and only jsb 8.4 grain these pellet and SDB barrel are made for each other ,you will know when you use it.
Avoid using 9plus pellet in this gun can break mainspring due to smaller powerplant of genex when itried heavy pellet it started struggling .
Rest it's a fun gun to shoot you too will tell this .
And yes adjust the trigger you know the way already.
These are my opinion and understanding about this genex .
One thing I can promise u though that it's the gun you are going to shoot more than any airrifle soon.
Enjoy the gun be healthy and safe.
Regards
Veerbhadra