AK 500 Agni - My first Post

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: AK 500 Agni - My first Post

Post by Basu » Fri May 15, 2015 10:54 am

800 fps......
None.....

Basu
Not all those wander , are lost...............

For Advertising mail webmaster
User avatar
Faisal.1
Learning the ropes
Learning the ropes
Posts: 28
Joined: Thu Jul 21, 2016 3:02 am

Re: AK 500 Agni - My first Post

Post by Faisal.1 » Thu Jul 21, 2016 3:46 am

mthayeb wrote:I was informed that there are two options to upgrade, either use the Indian made Gsmith Spring (cost INR 1000) or use the Daina Spring (cost INR 3500) . I chose for G Smith spring, because i have seen their pellets around and they do have some quality (BTW, precihole pellets are made by G Smith).
Hello sir,
Gsmith model 35 spring you use in your Ak 500 air rifle

User avatar
gobi2085
Fresh on the boat
Fresh on the boat
Posts: 6
Joined: Tue Jul 06, 2010 1:26 am
Location: Pollachi

Re: AK 500 Agni - My first Post

Post by gobi2085 » Mon Sep 12, 2016 12:16 am

sir i used Gsmith model 35 spring for uta new diana m35 . i cut the sring 3 coils and fitted
. in starting it is powerful but accuracy is not that old spring and after 200 shots my wooden stock cracked and the gun is also damaged

Big Daddy
Shooting true
Shooting true
Posts: 536
Joined: Fri Sep 18, 2009 6:54 pm
Location: Hyderabad

Re: AK 500 Agni - My first Post

Post by Big Daddy » Tue Sep 13, 2016 10:14 am

Allow the spring to settle. Could take 600 to 1000 shots.

BD
The early bird gets the worm, but the fact is, if the worm had woken up late, it would still be alive.

User avatar
gobi2085
Fresh on the boat
Fresh on the boat
Posts: 6
Joined: Tue Jul 06, 2010 1:26 am
Location: Pollachi

Re: AK 500 Agni - My first Post

Post by gobi2085 » Fri Sep 16, 2016 8:19 pm

ok sir now its ok

Post Reply