IHP National 35 model .22 coriginal spring and fiber washer

All posts related to air-guns (air-rifles, airsoft, air-pistols, air-guns etc.).
samirforguns
Fresh on the boat
Fresh on the boat
Posts: 3
Joined: Fri Jan 18, 2013 12:14 pm

IHP National 35 model .22 coriginal spring and fiber washer

Post by samirforguns » Wed May 15, 2013 1:24 pm

Dear Members can anybody tell me where I can find original IHP National 35 model .22 cal. air rifle spring and fibre washer. I am living in bhopal and indore where I can't find the original spring and fibre washer. recently visited an air gun shop in Mumbai at Abul Rehman street and there also got disappointed. I hav also got 25 model IHP .22 cal I tuned it with G-Smith Spring and G-Smith leather washer but not stisfied by the performance of G-Smith as trigger got hard....Ma question with all the members is which is the best suited spring and washer available for IHP 35 model in India..and if fiber washer (piston seal ) available in India .........thanks

For Advertising mail webmaster
User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by Basu » Sun May 26, 2013 5:36 pm

You may do PM to Kezar husen bandukwala, who happens to be our member and also a gun dealer in Indore.
He is a very helpful guy.

Basu
Not all those wander , are lost...............

samirforguns
Fresh on the boat
Fresh on the boat
Posts: 3
Joined: Fri Jan 18, 2013 12:14 pm

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by samirforguns » Mon May 27, 2013 3:52 pm

Thanks Basu but I already met him personally he dont have national spring and fiber washer

User avatar
brihacharan
Old Timer
Old Timer
Posts: 3112
Joined: Fri Jan 22, 2010 3:33 pm
Location: mumbai

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by brihacharan » Mon May 27, 2013 5:52 pm

samirforguns wrote: Thanks Basu but I already met him personally he dont have national spring and fiber washer
> Why don't you contact IHP factory directly & request them.
> The contact person is Mr. Makhija - Mobile No: 09898075543
Briha

User avatar
adilmaroof
Learning the ropes
Learning the ropes
Posts: 24
Joined: Thu Aug 04, 2011 10:20 pm
Location: hyderabad
Contact:

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by adilmaroof » Mon May 27, 2013 7:21 pm

There are various manufacturers of piston seals but regarding the spring CHEROKEE is the best indian made spring.
It is okay for me to have everything i want.....

User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by Basu » Mon May 27, 2013 11:32 pm

I am in disagreement with adilmaroof.
Cherokee is a spring with very high vibration,due to its carbon content.
It is worst if you use 3.2 mm 37 coil,called 35.
For IHP 35 ,you may go ahead max for 3 mm 37 coil,called 27 .
For IHP 25 ,it is the stock spring with wire dia 3 mm with 29 coil.
In higher segment ,you may go for 31 coil ,2.8 mm Diana spring from Target Tune India.
Choice is yours.

Basu
Not all those wander , are lost...............

najad
On the way to nirvana
On the way to nirvana
Posts: 78
Joined: Fri Nov 23, 2012 11:27 am

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by najad » Tue May 28, 2013 5:01 pm

buy precihole spring and washer from aimco, both are good and better than ihp factory spring and washer.gsmith spring is good one in terms of power but it increases noise to a great extent :evil: and also trigger will be more hard to pull.more over precihole spring has better fitting to spring guide than factory one.
Last edited by najad on Sun Jun 16, 2013 9:48 pm, edited 1 time in total.

User avatar
brihacharan
Old Timer
Old Timer
Posts: 3112
Joined: Fri Jan 22, 2010 3:33 pm
Location: mumbai

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by brihacharan » Tue May 28, 2013 5:15 pm

Basu wrote:I am in disagreement with adilmaroof.
Cherokee is a spring with very high vibration,due to its carbon content.
It is worst if you use 3.2 mm 37 coil,called 35.
For IHP 35 ,you may go ahead max for 3 mm 37 coil,called 27 .
For IHP 25 ,it is the stock spring with wire dia 3 mm with 29 coil.
In higher segment ,you may go for 31 coil ,2.8 mm Diana spring from Target Tune India.
Choice is yours.
Basu
> Good suggestion Basu :D
Briha

pratik_mahale
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 474
Joined: Sun Jun 28, 2009 12:59 pm
Location: mumbai

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by pratik_mahale » Tue May 28, 2013 10:13 pm

najad wrote:buy precihole spring and washer from aimco, both are good and better than ihp factory spring and washer.gsmith spring is good one in terms of power but it increases noise to a great extent :evil: and also trigger will be more hard to pull.more over precihole spring has better fitting to spring guide that factory one.
Precihole Piston Seal is good for IHP & I think cost you not more then Rs. 100/-
When I installed Precihole spring with seal in my .177 IHP 35 it was very smooth to cock, less vibration ,very smooth to shot & required less trigger pull only I was getting velocity around 550 fps but I was very happy with overall performance

najad
On the way to nirvana
On the way to nirvana
Posts: 78
Joined: Fri Nov 23, 2012 11:27 am

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by najad » Tue May 28, 2013 11:34 pm

spring costs rs.350 and seal rs.200
http://aimco.co.in/category/64-spares.aspx

User avatar
FN-Five-Seven
Almost at nirvana
Almost at nirvana
Posts: 172
Joined: Sun Aug 19, 2012 10:34 pm
Location: Calcutta

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by FN-Five-Seven » Tue May 28, 2013 11:38 pm

Basu wrote: Cherokee is a spring with very high vibration,due to its carbon content.
It is worst if you use 3.2 mm 37 coil,called 35.
For IHP 35 ,you may go ahead max for 3 mm 37 coil,called 27 .
For IHP 25 ,it is the stock spring with wire dia 3 mm with 29 coil.
In higher segment ,you may go for 31 coil ,2.8 mm Diana spring from Target Tune India.

I know whom to bug with all the questions regarding Air Rifle Tuning , when I will be tuning a Air Rifle
:D

Regards

F-N-Five-Seven
It's okay , if you disagree with me .
I can't force you to be right .

samirforguns
Fresh on the boat
Fresh on the boat
Posts: 3
Joined: Fri Jan 18, 2013 12:14 pm

Re: IHP National 35 model .22 coriginal spring and fiber wa

Post by samirforguns » Wed May 29, 2013 1:43 pm

Thank u all for ur suggestions I will try Prateek_mahale's suggestion of using percihole spring and washer...:)

User avatar
Sniperboy
Learning the ropes
Learning the ropes
Posts: 23
Joined: Sat Feb 18, 2017 10:50 am

Re: IHP National 35 model .22 coriginal spring and fiber washer

Post by Sniperboy » Tue Jun 06, 2017 8:59 am

Dr. Frds, I recently, I upgraded my IHP 35 spring with Precihole Spring and washer, it works smoothly. The trigger is soft and also cocking effort. Thanks for all of your advise.

User avatar
snIPer
Veteran
Veteran
Posts: 1661
Joined: Wed May 23, 2007 12:06 pm

Re: IHP National 35 model .22 coriginal spring and fiber washer

Post by snIPer » Tue Jun 06, 2017 7:58 pm

IHP springs are pretty good too.
On my Epitaph - Off to Happy Hunting Grounds.

User avatar
Basu
Veteran
Veteran
Posts: 1483
Joined: Wed Apr 08, 2009 7:14 pm
Location: Salt Lake Kolkata

Re: IHP National 35 model .22 coriginal spring and fiber washer

Post by Basu » Wed Jun 07, 2017 10:42 am

snIPer wrote:IHP springs are pretty good too.
It suits best with IHP.

Basu
Not all those wander , are lost...............

Post Reply