Re-boring of a double barrel .450 rifle

Posts related to rifles.
Post Reply
alameinite
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Tue Apr 29, 2014 10:31 pm
Location: Delhi
Contact:

Re-boring of a double barrel .450 rifle

Post by alameinite » Mon Jul 21, 2014 9:42 pm

Hi all, I have been offered a .450 double barrel rifle, whose ammo is not available, as concluded in past discussions. Can someone pl suggest what bore it can be re-bored to, whose ammo is readily available in the market and also the cost factor involved. Require a positive and sure response please.
"The hills are barren, cold and steep, But I have promises to keep,
A lot to sweat , Before I sleep,...And Miles to run before I sleep.."
:cheers:

For Advertising mail webmaster
TwoRivers
Veteran
Veteran
Posts: 1526
Joined: Tue Feb 26, 2008 1:11 pm
Location: Fairbanks, Alaska

Re: Re-boring of a double barrel .450 rifle

Post by TwoRivers » Mon Jul 21, 2014 10:38 pm

alameinite wrote:Hi all, I have been offered a .450 double barrel rifle, whose ammo is not available, as concluded in past discussions. Can someone pl suggest what bore it can be re-bored to, whose ammo is readily available in the market and also the cost factor involved. Require a positive and sure response please.
Without knowing which .450 cartridge the rifle is chambered for, no answer is possible. Also, it is not feasible to rebore a double. It can possibly be rechambered; the barrels can possibly be lined to a smaller caliber; and it can be fitted with new barrels if the action is suitable. An expensive proposition.

User avatar
Vikram
We post a lot
We post a lot
Posts: 5059
Joined: Fri Jun 02, 2006 6:14 am
Location: Tbilisi,Georgia

Re: Re-boring of a double barrel .450 rifle

Post by Vikram » Mon Jul 21, 2014 11:00 pm

.450 is an insufficient detail.There are a few .450s out there,both nitro and BP.

I am almost certain that a firearm cannot be legally re-chambered to a different calibre in India.Also, regulating and rebuilding a double rifle is an expert's domain and definitely not an easy job. Not many gun smiths can do it even abroad. IMO, you better leave it alone.
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."

miroflex
Shooting true
Shooting true
Posts: 592
Joined: Sun May 27, 2012 6:56 pm
Location: Allahabad, Dehradun, Usha Farm (Kheri), Lucknow.

Re: Re-boring of a double barrel .450 rifle

Post by miroflex » Wed Jul 23, 2014 10:53 am

You would be better off in trying to locate ammunition for the rifle. That would be a more feasible proposition than trying to have the rifle rebored and rechambered.

By the way, what is exact nomenclature of the cartridge? Is it black powder or nitro? I have been in touch with many arms and ammunition dealers and may be able to help you locate cartridges for the rifle.
"To the man who loves art for its own sake, it is frequently in its least important and lowliest manifestations that the keenest pleasure is to be derived." Sherlock Holmes in "The Adventure Of The Copper Beeches" by Sir Arthur Conan Doyle

Oxotnik
Fresh on the boat
Fresh on the boat
Posts: 5
Joined: Thu Mar 27, 2014 5:23 pm

Re: Re-boring of a double barrel .450 rifle

Post by Oxotnik » Wed Jul 23, 2014 3:45 pm

special permission will be required.

"The combined synergy of a man and rifle is matchless.
The steadiness of hand, the acuity of vision and finally
the art of knowing how to make the rifle an extension of the
body all equate to the ultimate synthesis of man and machine."

miroflex
Shooting true
Shooting true
Posts: 592
Joined: Sun May 27, 2012 6:56 pm
Location: Allahabad, Dehradun, Usha Farm (Kheri), Lucknow.

Re: Re-boring of a double barrel .450 rifle

Post by miroflex » Wed Jul 23, 2014 4:21 pm

For?
"To the man who loves art for its own sake, it is frequently in its least important and lowliest manifestations that the keenest pleasure is to be derived." Sherlock Holmes in "The Adventure Of The Copper Beeches" by Sir Arthur Conan Doyle

alameinite
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Tue Apr 29, 2014 10:31 pm
Location: Delhi
Contact:

Re: Re-boring of a double barrel .450 rifle

Post by alameinite » Thu Jul 24, 2014 3:22 pm

Hi all, just got a call from the dealer who offered me the .450.. sold it to someone.. but says he's got another double barrel rifle, this is a .360 rifle, again no ammo available.
"The hills are barren, cold and steep, But I have promises to keep,
A lot to sweat , Before I sleep,...And Miles to run before I sleep.."
:cheers:

User avatar
Vikram
We post a lot
We post a lot
Posts: 5059
Joined: Fri Jun 02, 2006 6:14 am
Location: Tbilisi,Georgia

Re: Re-boring of a double barrel .450 rifle

Post by Vikram » Thu Jul 24, 2014 4:29 pm

There is another dimension to it. In India a firearm without passing a relevant proof test cannot be sold. If a double rifle's calibre is converted into a different calibre, it needs to pass proof test at IOF.
It ain’t over ’til it’s over! "Rocky,Rocky,Rocky....."

dr.jayakumar
Veteran
Veteran
Posts: 1906
Joined: Tue Apr 06, 2010 9:55 am
Location: tamilnadu,india

Re: Re-boring of a double barrel .450 rifle

Post by dr.jayakumar » Fri Jul 25, 2014 9:29 am

Reboring and sleeving is meant for vehicles.i haven't heard of reboring a rifle at least not in india.buy something practical.
regards
dr.jk

alameinite
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Tue Apr 29, 2014 10:31 pm
Location: Delhi
Contact:

Re: Re-boring of a double barrel .450 rifle

Post by alameinite » Sat Jul 26, 2014 10:54 pm

Thanks a ton "Dr JK". You have summarised the whole topic in a very short and crisp phrase, that is "Buy something practical". I have totally dropped the idea of going for an old bore. Instead,my sole aim is to buy my first choice .22 single shot only now. Thanks again Dr RK.
Regards
Alameinite
"The hills are barren, cold and steep, But I have promises to keep,
A lot to sweat , Before I sleep,...And Miles to run before I sleep.."
:cheers:

User avatar
timmy
Old Timer
Old Timer
Posts: 2934
Joined: Mon Dec 08, 2008 7:03 am
Location: home on the range

Re: Re-boring of a double barrel .450 rifle

Post by timmy » Sat Jul 26, 2014 11:16 pm

Please check:

http://indiansforguns.com/viewtopic.php ... ne#p212734

This is a long way from being a centerfire rifle. However, there are barrels that can be bored and sleeved, similar to engine blocks.
“There is nothing new in the world except the history you do not know”

Harry S. Truman

miroflex
Shooting true
Shooting true
Posts: 592
Joined: Sun May 27, 2012 6:56 pm
Location: Allahabad, Dehradun, Usha Farm (Kheri), Lucknow.

Re: Re-boring of a double barrel .450 rifle

Post by miroflex » Fri Aug 15, 2014 3:26 pm

alameinite wrote:Hi all, just got a call from the dealer who offered me the .450.. sold it to someone.. but says he's got another double barrel rifle, this is a .360 rifle, again no ammo available.
Hi Alameinite,

The .360 is a Rook and Rabbit rifle calibre, meant for use on small game. It has long been obsolete.

All the best.
"To the man who loves art for its own sake, it is frequently in its least important and lowliest manifestations that the keenest pleasure is to be derived." Sherlock Holmes in "The Adventure Of The Copper Beeches" by Sir Arthur Conan Doyle

TwoRivers
Veteran
Veteran
Posts: 1526
Joined: Tue Feb 26, 2008 1:11 pm
Location: Fairbanks, Alaska

Re: Re-boring of a double barrel .450 rifle

Post by TwoRivers » Fri Aug 15, 2014 10:41 pm

miroflex wrote:
Hi Alameinite,

The .360 is a Rook and Rabbit rifle calibre, meant for use on small game. It has long been obsolete.

All the best.
Not so. There are quite a few .360 caliber cartridges that are not Rook and Rabbit rifles, but are (big) game cartridges. Not even sure if there was a .360 R&R cartridge.

alameinite
Almost at nirvana
Almost at nirvana
Posts: 174
Joined: Tue Apr 29, 2014 10:31 pm
Location: Delhi
Contact:

Re: Re-boring of a double barrel .450 rifle

Post by alameinite » Fri Aug 15, 2014 11:03 pm

Gentleman,I can only be sure when I myself see the weapon and get the details
"The hills are barren, cold and steep, But I have promises to keep,
A lot to sweat , Before I sleep,...And Miles to run before I sleep.."
:cheers:

Post Reply