IOF .22 revolver
- kedarmarkale
- Learning the ropes
- Posts: 22
- Joined: Sat May 14, 2011 12:14 am
- Location: govt
Re: IOF .22 revolver
Hiii aadhaulya grinding of chambers is not advisable as it will weaken the steel incerts and may cause premature failure...... also the grinding if not done perfectly will hamper functioning and any misalignment can cause accidents how ever if u still go ahead with it please do let me know the results
- TC
- Veteran
- Posts: 1805
- Joined: Tue Dec 05, 2006 11:50 am
- Location: Kolkata
Re: IOF .22 revolver
Honestly speaking you should not try doing anything on your own. This gun was not meant for KF ammo right from its birth. However if you still want to go ahead then in my opinion you could try polishing the chambers very lightly with a right sized reamer. Do it by hand, NOT a drill, not even in low speed. Use grinding paste in very small quantity. Since the material is aluminum alloy the paste will work much faster. The idea is to polish the insides of the chambers (only up to the length of the case from the top) just to the desired requirement and not increase the diameter of the chambers. Or else all ammo will sit loosely/ the gun will get screwed.aadhaulya wrote:I am booking a Pistol from IOF. In the mean time I have also bought a .22 Revolver two days ago and fired about 25 rounds. I have used Winchester and Indian ammo. There is no problem with the Winchester ammo and no problem in firing 1,2 or 3 indian rounds. But firing 4 or more indian rounds in one go jams the ejector and each shell has to be hammered out using a cleaning rod.
Being an Automobile guy, I am making a 'reaming rod' sort of contraption, in stainless steel and plan to grind the chambers using Engine valve grinding pastes. After doing that I may solve the ejection problem or may be screw up the revolver.
Hoping for the best....
Remember the Indian soft copper cases swell (especially if they are old) to a much greater extent on firing than British or American ammo in steel and brass cases. Hence the KF cases get stuck and the others don't. A little polishing may solve the problem. Or it may not.
TC
-
- Veteran
- Posts: 1174
- Joined: Wed Nov 20, 2013 10:41 pm
Re: IOF .22 revolver
Thanks Kedarmarkale and TC, for your suggestions. I have used a 5mm reamer that is roughly 0.5mm smaller than the bore and used a very fine grinding paste besides grinding it very lightly by hand.
Now there seems to be an improvement, after firing 8 rounds only 3 particular chambers get jammed. Once i hammer out the casing from those three chambers the others work fine.
Today being a Sunday I plan to use rubbing polish vigorously but by had only. This polish is used on painted surfaces for cutting the final coat of paint to give a smooth finish to the surface. Will post the results soon as I have to arrange for cartridges (used up 50 of them in my experiments).
Now there seems to be an improvement, after firing 8 rounds only 3 particular chambers get jammed. Once i hammer out the casing from those three chambers the others work fine.
Today being a Sunday I plan to use rubbing polish vigorously but by had only. This polish is used on painted surfaces for cutting the final coat of paint to give a smooth finish to the surface. Will post the results soon as I have to arrange for cartridges (used up 50 of them in my experiments).
-
- Learning the ropes
- Posts: 42
- Joined: Wed Mar 18, 2015 9:02 am
Re: IOF .22 revolver
yes , i do agree on the advice to buy a .22 cal rifle instead of iof revolver. my friend owns a .22 cal iof revolver and he is always complaining about the revolver. i don't know why we don't have good choices in .22 cal category(actually in any calibre categories be it a handgun /rifles or shotguns) . in handguns only a iof revolver is available which has god knows how many issues. no pistol is available in this category. revolver is far below international standards in quality. can't we have some thing like Ruger mark 3 or 22/45.S & W 22A,Bersa thunder .22lr, or something like these.
- tarzanboy73
- On the way to nirvana
- Posts: 88
- Joined: Tue May 26, 2009 10:06 pm
Re: IOF .22 revolver
In case anyone remembers me.....I have just taken posession of a .38 Colt...NSP issue.
Can some one with an NSP weapon on this forum PM me please. NDA/80
Also can anyone guide me to a good gun smith in Mumbai where I can get some maintenance done on the revolver.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Can some one with an NSP weapon on this forum PM me please. NDA/80
Also can anyone guide me to a good gun smith in Mumbai where I can get some maintenance done on the revolver.
You do not have the required permissions to view the files attached to this post.
- tarzanboy73
- On the way to nirvana
- Posts: 88
- Joined: Tue May 26, 2009 10:06 pm
Re: IOF .22 revolver
Just in case any of the fine people whom I chatted with years ago are still around...ngrewal wrote:Tarzanboy
Thats a good decision now its pistol vs revolver?
If the .22 was a safe and unrelibale gun then those 8 shots justify the choice but on flip side who wants a lemon on hands or a la 'Loose' gun.
Do turn in the papers for your PG gun but cant you buy one from a dealer they should be cheap compared to others?
Its alright regarding the officer I saw his photograph on another forum.
Best
I got my NSP. . 38 Colt...
Old but still works....
Hooyah!!!
- shadowring
- On the way to nirvana
- Posts: 71
- Joined: Tue Aug 16, 2011 12:52 pm
- Location: India
Re: IOF .22 revolver
Congratulations! I hope u didn't have to pay too much for it
“Never mistake motion for action.”
-
- Learning the ropes
- Posts: 46
- Joined: Sun Oct 05, 2008 3:23 pm
- Location: Mumbai
Re: IOF .22 revolver
How much you paid?
-
- Shooting true
- Posts: 709
- Joined: Sun Apr 15, 2007 11:57 am
- Location: Dehradun,Uttarkhand
Re: IOF .22 revolver
whats the latest cost of IOF 22 revolver
-
- Learning the ropes
- Posts: 22
- Joined: Tue Feb 03, 2009 6:44 pm
Re: IOF .22 revolver
Hi good boy,goodboy_mentor wrote:You cannot fire high velocity .22 lr cartridges through this aluminum bodied .22 IOF revolver. The aluminum chamber will burst. If you can get chamber of .22 IOF revolver made in steel from a good gunsmith that should solve the problem. But it will cost you money. Other than this aluminum bodied IOF .22 revolver other products of IOF are comparatively better. But still there is a lot of room for improvement in all of IOF products.
Is it legal to get chambers made with 4140/4150 steel from a local gunsmith. Kindly profess your valuable information.
Thanks.
-
- Old Timer
- Posts: 2928
- Joined: Sun Dec 07, 2008 12:35 pm
Re: IOF .22 revolver
If the license of gunsmith allows repairing handguns, it should not be an issue.tamancha wrote:Is it legal to get chambers made with 4140/4150 steel from a local gunsmith. Kindly profess your valuable information.
Thanks.
"If my mother tongue is shaking the foundations of your State, it probably means that you built your State on my land" - Musa Anter, Kurdish writer, assassinated by the Turkish secret services in 1992
-
- Learning the ropes
- Posts: 46
- Joined: Sun Oct 05, 2008 3:23 pm
- Location: Mumbai
Re: IOF .22 revolver
It's certainly not legal.tamancha wrote:Hi good boy,goodboy_mentor wrote:You cannot fire high velocity .22 lr cartridges through this aluminum bodied .22 IOF revolver. The aluminum chamber will burst. If you can get chamber of .22 IOF revolver made in steel from a good gunsmith that should solve the problem. But it will cost you money. Other than this aluminum bodied IOF .22 revolver other products of IOF are comparatively better. But still there is a lot of room for improvement in all of IOF products.
Is it legal to get chambers made with 4140/4150 steel from a local gunsmith. Kindly profess your valuable information.
Thanks.
-
- Old Timer
- Posts: 2928
- Joined: Sun Dec 07, 2008 12:35 pm
Re: IOF .22 revolver
What makes it not legal to do repairs that make improvements or enhance safety of the product?mhksmk wrote:It's certainly not legal.
"If my mother tongue is shaking the foundations of your State, it probably means that you built your State on my land" - Musa Anter, Kurdish writer, assassinated by the Turkish secret services in 1992
-
- Learning the ropes
- Posts: 46
- Joined: Sun Oct 05, 2008 3:23 pm
- Location: Mumbai
Re: IOF .22 revolver
Read the Act & Rules you'll have proper insightgoodboy_mentor wrote:What makes it not legal to do repairs that make improvements or enhance safety of the product?mhksmk wrote:It's certainly not legal.
-
- Old Timer
- Posts: 2928
- Joined: Sun Dec 07, 2008 12:35 pm
Re: IOF .22 revolver
Rule 21(1) of Arms Rules 1962 is quoted below -mhksmk wrote:Read the Act & Rules you'll have proper insightgoodboy_mentor wrote:What makes it not legal to do repairs that make improvements or enhance safety of the product?mhksmk wrote:It's certainly not legal.
Please enlighten the forum referring specific provisions of Arms Act or it's Rules that make it illegal for gunsmith licensed to do repairs/ conversions that make improvements, enhance safety or reliability of the product.Where a license is granted in Form IX or Form XI for conversion or repair, but not manufacture, of any category of firearms or ammunition, it entitles the licensee to fabricate components or parts for the purpose of conversion or repair of such firearms or ammunition but not to manufacture such components or parts to be utilised for assembling into complete firearms or ammunition of any category which he is not allowed to manufacture.
"If my mother tongue is shaking the foundations of your State, it probably means that you built your State on my land" - Musa Anter, Kurdish writer, assassinated by the Turkish secret services in 1992