Page 1 of 1
Permission for modification of 0.32 pistol
Posted: Tue Jul 31, 2018 12:15 am
by pistolprince007
Do I need to take permission to do modification of my .32 pistol from the licensing authority ?
Or any gun dealer can do it ?
Re: Permission for modification of 0.32 pistol
Posted: Fri Aug 03, 2018 10:54 pm
by Vineet
What kind of modification you want to get done?
Rebluing, grips change, sights change are ok.
You are not allowed to play with serial no. and other markings.
Re: Permission for modification of 0.32 pistol
Posted: Sat Aug 04, 2018 5:43 pm
by nitroex700
Vineet wrote:What kind of modification you want to get done?
Rebluing, grips change, sights change are ok.
You are not allowed to play with serial no. and other markings.
No modification to the barrel, caliber conversion, fire rate change etc. is allowed in particular. Suppressors, muzzle breaks etc. are also in the gray area as far as I know.
Re: Permission for modification of 0.32 pistol
Posted: Mon Aug 06, 2018 10:19 am
by pistolprince007
Vineet wrote:What kind of modification you want to get done?
Rebluing, grips change, sights change are ok.
You are not allowed to play with serial no. and other markings.
I want this type of modification as shown in the picture
Re: Permission for modification of 0.32 pistol
Posted: Sat Jul 06, 2019 8:52 pm
by nikkiboy12
Hello,
With due Respect to every member... The above shown modifications as seen are common...I have got it done from a known gunsmith in Meerut... Exposed Hammer, Push Button magazine release, Ventilated rail on slide, blueing, grip change etc... After this modification recently my license was due for renewal... As i was asked i visited the authorities with the fire arm ... They haven't raised any objection... So As far in my knowledge these things are not objectionable... Rest i leave with the fine sense of knowledge of the members here of this esteemed forum... Regards