Pistol grips Custom made for ashani

Posts related to handguns (pistols, revolvers)
Post Reply
birbrar
On the way to nirvana
On the way to nirvana
Posts: 60
Joined: Mon Jan 16, 2017 7:06 am

Pistol grips Custom made for ashani

Post by birbrar » Fri Apr 07, 2017 8:09 pm

Got idea from Colt MAB , Mouser . Made these grips from piece of 100×65×10 MM wood then used Dremel drill rotor bits and then sandpaper 120,180,320 and finally 1000 grit filled pores with putty powder (better Use silly wood sealer I missed it )and finished with polyurethane commonly known as Touchwood with hand brush U can spray also I tried but got thick coating with spray then I removed it and used brush .
Comments and suggestions welcome ImageImage

Sent from my LS-5015 using Tapatalk

For Advertising mail webmaster
User avatar
kanglasa
Learning the ropes
Learning the ropes
Posts: 33
Joined: Wed Mar 24, 2010 1:08 pm
Location: delhi
Contact:

Re: Pistol grips Custom made for ashani

Post by kanglasa » Sat Apr 08, 2017 4:47 pm

Nice work, the finishing is really good like custom made. Cheers
I walk as if I rule the world or else i walk as if I don't give a damn who the heck rules the world and remember there is a hairline differences between a foolhardy and bravery.
EK GOLI DO DUSHMAN

Post Reply