Arminius HW3 .32 S&W Long 7 Shot Revolver

Lucky007 · Post by **Lucky007** » Thu Aug 13, 2015 3:25 pm

Hi Friends !

I am a fresh entrant to this specialized forum. I hope my queries regarding my revolver shall be well received and responded here. I inherited an Arminius brand revolver model HW3 .32 S&W Long side opening revolver during early 1990s. The revolver was imported from Singapore during 1980s by my father. It is hardly used by me and was well kept by my father. The condition is at least 90% (of brand new).

I have heard from some friends that the body of this revolver is made of some alloy and it may break up anytime using KF Ammo. Though I have used only a few times, but always with KF ammo (India origin) and it has showed no abnormality so far. One of my friend who is also a gun dealer has strongly suggested me to sell this revolver for around Rs. 2.35 L.

Out of fear, if alloy body has a strong tendency to break-up sooner or later, I am confused if I should sell this weapon and at a price like Rs. 2.35 L. I have also been suggested to buy an IOF .32 in place.

I urge the senior and well experienced members at this forum to kindly suggest me, if I should follow my gun dealer friend's advice?

Keenly awaiting your response.

Lucky007 · Post by **Lucky007** » Thu Aug 13, 2015 4:17 pm

I am sorry

No replies yet...The Queries simplified now:

1) If the Alloy body of the revolver in question has a tendency to blow up or break up while using Indian IOF ammunition?

2) If I am going to sell this revolver, what should be a fair price for 90-95% condition revolver this time?

marksman_dd · Post by **marksman_dd** » Thu Aug 13, 2015 4:31 pm

first of all welcome to this forum,
a few pics of the gun will help the experts of this forum to clarify your query..
since your model is HW3, it was produced in year 1960, and hence could fetch you extra bucks...
experts comments are required.....

Lucky007 · Post by **Lucky007** » Thu Aug 13, 2015 4:40 pm

Dear Marksman

Thank you so much for kind response and gesture.

Shortly I am going to upload the pics of the gun.

Rgds

Lucky

Walibaa · Post by **Walibaa** » Thu Aug 13, 2015 5:48 pm

Afaik,
using Iof ammunation wont damage your gun.
Also your revolver is 100 times better than Iof.32
All Weapons are made from some or the other alloy's and coated with chemicals to keep the weight as light as possible.

Lucky007 · Post by **Lucky007** » Thu Aug 13, 2015 7:28 pm

Thanks ..I am honored to be a part of such a high standard forum.

Best Regards

yashish83 · Post by **yashish83** » Thu Aug 13, 2015 8:49 pm

sell it also sell my revolver 2 year back ai got 2.25l for the revolver and purchased webley its farr better than arminus or buy iof revolver its worth it if any quried just pm me or call me about arminus

Lucky007 · Post by **Lucky007** » Thu Aug 13, 2015 9:15 pm

Thanks ....so alloy body is not an issue at all.

dr.jayakumar · Post by **dr.jayakumar** » Fri Aug 14, 2015 10:59 am

friend,
we need pics.if you sell you'll have to spend the double for the next.
regards
dr.jk

Lucky007 · Post by **Lucky007** » Fri Aug 14, 2015 2:14 pm

@Dr. Jay Kumar Ji....Pls. have a look at the pics and share your kind review.
@Yash....thnx. for reply. I am not able to connect to you over Private Messaging Options here..
If I go for selling this gun what should be a reasonable selling price....please comment. Also at what price I may get an used Webley Scott in India.
Waiting for expert replies please.

Ravindrane · Post by **Ravindrane** » Fri Aug 14, 2015 5:21 pm

Hi lucky sir you have nice weapon there ! If the alloy is prone to break on falling, the manufacturer would not have preferred the alloy material. Wont they have thought over it ? They are producing weapons and not show case pieces to brake on fall. Probably they brake when you hammer it. My advice not to sell it. The dealer has an eye on it and looking forward to a lucrative deal. If you are fixed on selling it I shall buy 10 k more what your dealer offers.

Lucky007 · Post by **Lucky007** » Fri Aug 14, 2015 8:07 pm

Hi ! Ravindrane Sir
Many thanks for positive review and encouragement to sustain the gun. I am waiting for some more comments and reviews from experts like you to reach at a solid fact-based decision.
Regards
Lucky

Post by **Sakobav** » Sat Aug 15, 2015 7:32 pm

Hang on to this revolver its heirloom I think it's better than Indian revolver buying a replacement gun of better brand is a short in dark! So keep this one unless there are monetary reasons or other factors ?

Post by **Vikram** » Sat Aug 15, 2015 10:35 pm

Lucky007,

If you do a google search about alloy frame revolvers, your fears will be put to rest. There is a long thread on Arminius revolvers on IFG. Do a search and you will find out a lot of useful info here. That is such a nice looking revolver you have there.

Lucky007 wrote:One of my friend who is also a gun dealer has strongly suggested me to sell this revolver for around Rs. 2.35 L.

Please do this. Ask a dealer, not your friend, how much an Arminus HW .32 revolver in near new condition costs. You will find the feedback to be of interest.

GNV · Post by **GNV** » Sat Aug 15, 2015 10:36 pm

If you don't need to sell it then don't sell it.
Regards

Indians For Guns

Indians For Guns

Arminius HW3 .32 S&W Long 7 Shot Revolver

Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver

Re: Arminius HW3 .32 S&W Long 7 Shot Revolver