Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Posts related to shotguns.
Post Reply
captrakshitsharma
Shooting true
Shooting true
Posts: 727
Joined: Fri Aug 07, 2009 12:36 am
Location: Dehradun, Delhi ,Gurgaon
Contact:

Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by captrakshitsharma » Sat Aug 22, 2009 1:11 am

Hi guys ! My amoo dearer is pushing shaktiman over KF cart.. which is better and is there any harm / damage to barell of my a hollis and sons hammer gun if i fire shaktiman slugs/ ball carts..??
I dont dial 911... I dial .357

For Advertising mail webmaster
User avatar
Risala
Shooting true
Shooting true
Posts: 916
Joined: Fri Mar 02, 2007 12:24 am
Location: Khurpatal

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by Risala » Sat Aug 22, 2009 1:41 am

If your gun has 70 mm chambers,you shouldnt have any issue....just go ahead and shoot...folks speculate about Shaktiman primers being corrosive,but I would leave it at that...I have fired them they looked ok to me....

Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm
Location: Bangalore, India.

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by Mack The Knife » Sat Aug 22, 2009 8:33 am

is there any harm / damage to barell of my a hollis and sons hammer gun if i fire shaktiman slugs/ ball carts..??
Depends on what choke you have on the barrels.

Sanjay, Shaktiman cartridges are now available with imported non-corrosive primers.

captrakshitsharma
Shooting true
Shooting true
Posts: 727
Joined: Fri Aug 07, 2009 12:36 am
Location: Dehradun, Delhi ,Gurgaon
Contact:

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by captrakshitsharma » Mon Aug 24, 2009 10:05 pm

its a standard barrel.. 12 ga. i m not sure /dont think it has any chokes. The carts fit fine...pls shed more light on chokes?? and i have heard the same corrosive thing about the primer... is KF ammo better. or is it just hearsay.
I dont dial 911... I dial .357

winnie_the_pooh
Veteran
Veteran
Posts: 1756
Joined: Fri Aug 21, 2009 1:49 pm

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by winnie_the_pooh » Mon Aug 24, 2009 10:20 pm

A unfired 12 ga. 70mm cartridge will fit in a 65mm chamber

captrakshitsharma
Shooting true
Shooting true
Posts: 727
Joined: Fri Aug 07, 2009 12:36 am
Location: Dehradun, Delhi ,Gurgaon
Contact:

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by captrakshitsharma » Mon Aug 24, 2009 10:34 pm

how do i know what chamber it is???
I dont dial 911... I dial .357

User avatar
snIPer
Veteran
Veteran
Posts: 1661
Joined: Wed May 23, 2007 12:06 pm

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by snIPer » Tue Aug 25, 2009 11:09 am

The Chamber length will be mentioned below the barrels.
70 mm or 65mm.
If you are unsure of the choke (will be mentioned below the barrels.)and still want to fire balls. then the safest way to check that is run the ball thru the barrel - usually the right one. running the ball - remove the ball from the cartridge and then roll it thru the barrel. If you are not aware of reloading the cartridge then do not try it.
/s/
On my Epitaph - Off to Happy Hunting Grounds.

sudhaiob
Almost at nirvana
Almost at nirvana
Posts: 242
Joined: Thu Dec 27, 2007 4:19 pm
Location: Tiruchirapalli, Tamilnadu 620021

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by sudhaiob » Tue Aug 25, 2009 8:56 pm

in the british guns it would mentioned in inches 2\1\2=65 mm and 2\3\4=70 mm
regs
sudhaiob

captrakshitsharma
Shooting true
Shooting true
Posts: 727
Joined: Fri Aug 07, 2009 12:36 am
Location: Dehradun, Delhi ,Gurgaon
Contact:

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by captrakshitsharma » Sun Aug 30, 2009 4:48 pm

Thx guys so if its a 65 mm then i shoudnt shoot them.. is it wht u saying???? and how do i know about chokes and what are chokes.. what do they do ..
I dont dial 911... I dial .357

jaz
Almost at nirvana
Almost at nirvana
Posts: 155
Joined: Mon Feb 04, 2008 5:35 pm
Location: ludhiana

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by jaz » Sun Aug 30, 2009 5:23 pm

sharma ,
12 bore barrel cylinder is 729 thousand i.e. 18.516mm and if there is any construction (I mean if bore from muzzel end nearly between 40 upto 90 mm is lesser in bore diameter than standard 729 thousand)means barrels are chocked .
for measuring chokes you need bore guage (I do have all measuring instruments in my tool room).
If barrels are chocked firing range is increased.My shoty o/u made to order by modern jammu, upper barrel 695 thou (full choked), lower barrel 715 thou (IM) . BB IOF shell in upper barrel is 100% effective upto 90 yards.
I have sold gun otherwise it was working very fine.

My father have 12 bore single barrel 32" (cylinder) AYA spain with same BB IOF shell is only effective upto 40-45 yards, but shaktiman slug works very fine in AYA cylinder barrel.

captrakshitsharma
Shooting true
Shooting true
Posts: 727
Joined: Fri Aug 07, 2009 12:36 am
Location: Dehradun, Delhi ,Gurgaon
Contact:

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by captrakshitsharma » Thu Sep 10, 2009 12:07 am

Thanks ..these are the number/ markings on my shot gun A hollis and sons. Pls shed light on chokes and chamber length. 13/1 NP BV Nitro Proof 1/4 s&b 4 1/2 DRS .

-- Thu Sep 10, 2009 1:10 am --

In a triangle it says 12 c and between the barells it says 621
I dont dial 911... I dial .357

User avatar
snIPer
Veteran
Veteran
Posts: 1661
Joined: Wed May 23, 2007 12:06 pm

Re: Shaktiman Slugs/Ball Cartridge in A Hollis & Sons Hammer Sho

Post by snIPer » Wed Sep 16, 2009 11:53 am

Hi captrakshitsharma,
can you please post some pics of ur hammer shotgun with the markings too.
/s/
On my Epitaph - Off to Happy Hunting Grounds.

Post Reply