My New Airforce Condor in 0.177 cal

GNV · Post by **GNV** » Thu Oct 01, 2020 11:37 pm

Gun is from a dealer. Barrel Shroud from airgunindia.com. More of cosmetic than practical.

GNV · Post by **GNV** » Thu Oct 01, 2020 11:47 pm

Attached to the gun is a 350 cc tank fitted with a high flow valve for high power. The longer tank is the standard 500 cc Airforce tank for under 18 Joules power.

GNV · Post by **GNV** » Thu Oct 01, 2020 11:50 pm

20201001_234016.jpg

GNV · Post by **GNV** » Thu Oct 01, 2020 11:54 pm

Waste of money at legal power. But in FAC deadly hunting gun even in 0.177 cal

GNV · Post by **GNV** » Thu Oct 01, 2020 11:55 pm

Yet to fully understand its power range and accuracy in FAC mode.

GNV · Post by **GNV** » Thu Oct 01, 2020 11:58 pm

Very simple design. But very uncomfortable for those used to guns with regular stocks.

GNV · Post by **GNV** » Thu Oct 01, 2020 11:59 pm

Very easy to strip it to parts and reassemble. For servicing the gun and the air bottle.

Bishop · Post by **Bishop** » Fri Oct 02, 2020 8:41 am

Congratulations on your new acquisition sir

4X4 · Post by **4X4** » Fri Oct 02, 2020 9:34 am

Congratulations on your new Baby.

guru050 · Post by **guru050** » Fri Oct 02, 2020 11:40 am

Congratulations Sir.

GNV · Post by **GNV** » Fri Oct 02, 2020 12:01 pm

Thank You all.

SMJ · Post by **SMJ** » Sun Oct 04, 2020 5:14 pm

Congratulations sir!

GNV · Post by **GNV** » Fri Oct 09, 2020 9:43 pm

Thank You

goodburner · Post by **goodburner** » Sat Oct 10, 2020 9:14 am

I bought airforce condor from airgunindia as well. I have some comments about him but lets keep that aside.
For the life of me I am not able to pump any air into the tank. I have followed all the instructions. I have a hill mk4 pump from pyramid air. When I insert the quick disconnect, its like nothing happens. The manometer in the tank reads 1000 psi but I the pump doesn't even move an inch. I have tried pumping like a madman and it doesn't move an inch.

I noticed that the grey color valve in the tank is recessed a bit, I feel like it does not even open, so all the air gets leaked out instead of going in.

I truly regret this purchase, so much that I'm trying not to think about it. I feel like nothing will help.

Of course the guy @ Airgunindia, he is asking me to send me the hose and adapter, I really do not trust him at all. Now I'm stuck.
Due to covid no diving or paintball shops are open.

Obviously the airgunindia guy will never accept my return, so I don't know what to do.

If you can help me, I will be truly grateful for you.

@GNV

GNV · Post by **GNV** » Tue Nov 10, 2020 11:59 am

I am sorry I don't clearly understand your question. Do you mean that the pump handle is not moving when trying to pump when connected to the gun . The Airforce company says it requires different adapters for different air sources. It was clearly mentioned in the pyramydair .com web page for condor. My condor came with Quick Connector type fill plug . As I use both scba cylinders and a compressor to fill my guns and both sources have QF adapters I don't find any problem. Find the correct type adapter for your condor which matches the one on your pump hose end.

GNV

Indians For Guns

Indians For Guns

My New Airforce Condor in 0.177 cal

My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal

Re: My New Airforce Condor in 0.177 cal